+44 (0)1732 371100
Language:
Marine and Offshore Solutions Industrial Solutions Construction Products Solutions

Construction Products

Inertia Pouring Frames Type IPF

ipf_300.png

Inertia Pouring Frames have been developed for use with machines which produce high levels of vibration or those which are subjected to external forces or are simply unstable when mounted directly on spring or rubber mountings.

The use of Type IPF concrete filled steel frames allows high deflection/low stiffness mounting systems to be used giving extremely high vibration isolation without excessive motion.

 

  • Fully welded steel construction with integral concrete reinforcement fixed at 40 mm above bottom of frame.
  • Standard recessed height reducing corner brackets to suit Type OS Open Spring and Type ECS Enclosed Spring mountings or cantilever design for larger mountings.
  • Frames can be manufactured for 25 mm and 50 mm deflection mountings and 3 to 4 mm deflection Studflex rubber pads.
  • Large range of standard sizes in three depths 150
  • 200 and 300 mm and frame lengths not greater than 12 x depth unless additional mountings are fitted.
  • Any size designed to order with larger units supplied in bolt together “on site” sectional form.
  • Finished with a single coat of anti-corrosive primer on external surfaces only or special finishes to order.
  • Compressors.
  • Generating Sets.
  • Engine/Dynamometer Test Rigs.
  • Refrigeration Plant.
  • Pumps (particularly Belt Driven types).

There are no application notes for this product.

The Curzon Cinema, Oxford

Case Study


Westgate, Oxford Main Contractor: iSpace Corporate Interiors Limited Acoustic Consultancy: Holtz Acoustics Structural Engineers : Paul Owen Associates

Read More
Holland and Holland Shooting Club

Case Study


Location: Ducks Hill, Northwood Main Contractor: Weiser Construction Acoustic Consultancy: Lee Cunningham Partnership

Read More
Enquire Now