Product Header

Open Spring Mountings - Special Range Sizes
OS25, OS50, OS75 and OS10

For Building Services Applications

Originally designed for use with Type IPF Inertia Pouring Frames, the OS Mountings are now widely used to isolate vibration from every conceivable type of rotating and reciprocating machine. Where control of transient motion is required Open Spring Mountings can be used in conjunction with our Viscous Dampers Type SFD.

For applications requiring bolting down the rubber seating pad and grommets ensure that there is no direct metal path between the machine and the seating, thus enhancing the high frequency noise isolation.

OS - Open Spring Mountings

Design Features:

  • Nominal 25, 50, 75 and 100 mm deflection colour coded helical steel springs to BS1726 Class B with 50% overload capacity and O/D equal to at least 85% of working height.
  • Can be bolted to supporting structure or free standing on 6 mm thick ribbed rubber seating pad (fitted as standard).
  • Fully height adjustable.
  • Zinc plated metals.
  • No snubbing gives maximum efficiency.

Typical Applications:

  • Axial and Centrifugal Fans.
  • Air Handling Units.
  • Low level pipework.
  • With Inertia bases type IPF for pumps, generating sets and compressors etc.

Christie & Grey Anti Vibration Mounts, Vibration Isolation and Shock Control Products.
All rights reserved. Graphics & content Copyright © Christie & Grey Limited 2013

Site Map | Privacy Policy | Website Disclaimer

Quality is fundamental to all aspects of our service which is endorsed by our registration to BS EN ISO 9001:2008.